[openmamba-devel-it] problemi con wicd dopo aggiornamento a makedist

[Silvan Calarco]

In data giovedì 06 agosto 2009 14:07:30, Titti a gmail ha scritto:
: > Ercole Carpanetto ha scritto:
> > stando al sito wireless.kernel.org <http://wireless.kernel.org> devi
> > usare questa procedura
> > export FIRMWARE_INSTALL_DIR="/lib/firmware"
> > wget http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2
> >
> > tar xjf broadcom-wl-4.150.10.5.tar.bz2
> > cd broadcom-wl-4.150.10.5/driver
> > sudo ../../b43-fwcutter-012/b43-fwcutter -w "$FIRMWARE_INSTALL_DIR"
> > wl_apsta_mimo.o In pratica la versione di firmware non è abbastanza
> > aggiornata
> > fammi sapere
> > ercole
>
> Non funziona più correttamente b43-fwcutter, dite che è possibile
> aggiornare la versione?
>
> b43-fwcutter -w "/lib/firmware" wl_apsta_mimo.o
> Sorry, the input file is either wrong or not supported by b43-fwcutter.
> This file has an unknown MD5sum d768cdc18fbacb8e9fd402dadb08421d.
>
> b43-fwcutter -w "/lib/firmware" wl_apsta_mimo.o
> Sorry, the input file is either wrong or not supported by b43-fwcutter.
> This file has an unknown MD5sum d768cdc18fbacb8e9fd402dadb08421d.
>
> Sorry, the input file is either wrong or not supported by b43-fwcutter.
> This file has an unknown MD5sum eaec9e329321d3a21a95815937ab044b.
>
> b43-fwcutter -w "/lib/firmware" -l
> b43-fwcutter version 011
>
> Extracting firmware is possible from these binary driver files.
> The <ID> column shows the unique identifier string for your firmware.
> You must select the firmware with the same ID as printed by the kernel
> driver on modprobe.
> Note that only recent drivers print such a message on modprobe.
> Please read http://linuxwireless.org/en/users/Drivers/b43#devicefirmware
>
> <driver>        <filename>              <microcode>     <ID>    <MD5
> checksum>
>
> b43legacy       wl_apsta.o              295.14          FW10
> e08665c5c5b66beb9c3b2dd54aa80cb3
> b43             wl_apsta.o              351.126         FW11
> 9207bc565c2fc9fa1591f6c7911d3fc0
> b43             wl_apsta_mimo.o         351.126         FW11
> 722e2e0d8cc04b8f118bb5afe6829ff9
> b43             wl_apsta_mimo.o         410.2160        FW13
> cb8d70972b885b1f8883b943c0261a3c

Qualche mese fa ho fatto ed aggiunto un componente per l'installazione dei 
firmare broadcom B43, si trova in:

Menù -> Applicazioni -> Sistema -> openmamba -> Installazione di software 
dalla rete -> Installa il firmware per  Broadcom B43.

L'hai provato?

ciao,
Silvan

-- 
mambaSoft di Calarco Silvan
Web: http://www.mambasoft.it
 
mambaSoft Store @ http://shop.mambasoft.it
openmamba GNU/Linux development @ http://www.openmamba.org