[openmamba-devel-it] freecycle

Ercole Carpanetto ercole69 a gmail.com
Dom 20 Lug 2008 18:07:31 CEST


2008/7/20 gil <puntogil a libero.it>:

> Ercole Carpanetto ha scritto:
>
>>
>>
>> 2008/7/19 gil <puntogil a libero.it <mailto:puntogil a libero.it>>:
>>
>>
>>    ciao
>>    ho aggiornato freecycle
>>    tutto bene finche non si clicca sul tasto con l'etichetta "time
>>    stretch to: "
>>
>>    $ freecycle
>>    zap buffer 1097252852 done
>>    zap buffer 1130688168 done
>>    zap buffer -1073921336 done
>>    +++++++init buffer type: 4 no: 1 length: 0
>>    zap buffer 2 done
>>    No LADSPA_PATH environment variable!, trying /usr/lib/ladspa
>>    Start loading LADSPA plugins...
>>    -----------file: amp.so
>>    Mono Amplifier loaded
>>    Stereo Amplifier loaded
>>    -----------file: delay.so
>>    Simple Delay Line loaded
>>    -----------file: filter.so
>>    Simple Low Pass Filter loaded
>>    Simple High Pass Filter loaded
>>    -----------file: noise.so
>>    White Noise Source loaded
>>    -----------file: sine.so
>>    Sine Oscillator (Freq:audio, Amp:audio) loaded
>>    Sine Oscillator (Freq:audio, Amp:control) loaded
>>    Sine Oscillator (Freq:control, Amp:audio) loaded
>>    Sine Oscillator (Freq:control, Amp:control) loaded
>>    ...End.
>>    ALSA sequencer successfully opened.
>>    created the MIDI port 128:0 Freecycle
>>
>>  A:0.1,0.05,0.5,H:0.1,D:0.1,0.25,1,S:1,R:0.1,0.95,0.5,Dur:1000,Res:100,M:1
>>    Querying Jack...
>>    JACK tmpdir identified as [/dev/shm]
>>    Connected to JACK.
>>    Trying to apply envelope
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    in small wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [small wave]) Buffers zapped
>>    zap buffer 0 done
>>    zap buffer 2 done
>>    zap buffer 4 done
>>    +++++++init buffer type: 0 no: 0 length: 68731
>>    zap buffer 0 done
>>    init buffer 0 done
>>    +++++++init buffer type: 4 no: 1 length: 68731
>>    zap buffer 2 done
>>    init buffer 2 done
>>    Trying to apply envelope
>>    Zapping Instant Energy buffers
>>    in small wave setZoomRatio()
>>    in small wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [small wave]) Buffers zapped
>>    start: 0 end: 68731
>>    Drawing from 0 to 68731
>>    end drawing
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    start: 0 end: 68731
>>    Drawing from 0 to 68731
>>    Started computing instant energies
>>    Ended computing instant energies
>>    Recomputing beats in time domain..
>>    in central wave resizeEvent() zoomRatio: 68
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    start: 0 end: 68731
>>    Drawing from 0 to 68731
>>    end drawing
>>    Recomputing beats in time domain ended
>>    Finding Zero-Crossings
>>    max variance: 14.3142 min variance: 0.00729388
>>    Finding Zero-Crossings ended
>>    Setting beatlines
>>    beatLines: 0
>>    hiding selection rectangle
>>    Wave L
>>    Effect added:1044
>>    +++++++init buffer type: 2 no: 1 length: 68731
>>    zap buffer 2 done
>>    init buffer 2 done
>>    +++++++init buffer type: 4 no: 2 length: 68731
>>    zap buffer 4 done
>>    init buffer 4 done
>>    applying plugin from sample: 0 to sample:68731
>>    Plugin applied
>>    Trying to apply envelope
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 68000
>>    Drawing from 0 to 68000
>>    end drawing
>>    in small wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [small wave]) Buffers zapped
>>    S: 0 E: 68913 PX: 0 Z: 93
>>    start: 0 end: 68731
>>    Drawing from 0 to 68731
>>    end drawing
>>    in central wave resizeEvent() zoomRatio: 68
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 68000
>>    Drawing from 0 to 68000
>>    end drawing
>>    set complex
>>    Zapping Instant Energy buffers
>>    Trying to apply envelope
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 68000
>>    Drawing from 0 to 68000
>>    end drawing
>>    in small wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [small wave]) Buffers zapped
>>    S: 0 E: 68913 PX: 0 Z: 93
>>    start: 0 end: 68731
>>    Drawing from 0 to 68731
>>    end drawing
>>    hiding selection rectangle
>>    Setting beatlines
>>    beatLines: 1
>>    Zapping Instant Energy buffers
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 68000
>>    Drawing from 0 to 68000
>>    end drawing
>>    Trying to apply envelope
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 68000
>>    Drawing from 0 to 68000
>>    end drawing
>>    in small wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [small wave]) Buffers zapped
>>    S: 0 E: 68913 PX: 0 Z: 93
>>    start: 0 end: 68731
>>    Drawing from 0 to 68731
>>    end drawing
>>    hiding selection rectangle
>>    Setting beatlines
>>    beatLines: 1
>>    selected MIDI device empty, reading devices...
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 68000
>>    start drawing spectrum
>>    Computing fft
>>    fft computed.
>>    band height factor: 0.445238 band width factor:3.76471
>>    jump: 256
>>    Last chunk: 0
>>    real width: 1000 rounded width: 998
>>    end drawing spectrum
>>    start: 0 end: 68000
>>    start drawing spectrum
>>    band height factor: 0.445238 band width factor:3.76471
>>    jump: 256
>>    Last chunk: 0
>>    real width: 1000 rounded width: 998
>>    end drawing spectrum
>>    start: 0 end: 68000
>>    start drawing spectrum
>>    band height factor: 0.445238 band width factor:3.76471
>>    jump: 256
>>    Last chunk: 0
>>    real width: 1000 rounded width: 998
>>    end drawing spectrum
>>    start: 0 end: 68000
>>    start drawing spectrum
>>    band height factor: 0.445238 band width factor:3.76471
>>    jump: 256
>>    Last chunk: 0
>>    real width: 1000 rounded width: 998
>>    end drawing spectrum
>>    Trying to apply envelope
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 68000
>>    start drawing spectrum
>>    Computing fft
>>    fft computed.
>>    band height factor: 0.445238 band width factor:3.76471
>>    jump: 256
>>    Last chunk: 0
>>    real width: 1000 rounded width: 998
>>    end drawing spectrum
>>    in small wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [small wave]) Buffers zapped
>>    S: 0 E: 68913 PX: 0 Z: 93
>>    start: 0 end: 68731
>>    Drawing from 0 to 68731
>>    end drawing
>>    start writing 68731 samples to:
>>    0-/home/gil/.freecycle/temp/1216480260_0 from: 0 to 68731
>>    sfseek: 0
>>    SoundTouch compiled with FLOAT_SAMPLES
>>    new to old bpm: inf
>>    resampling from: 0 to: 68731
>>    +++++++init buffer type: 0 no: 0 length: 0
>>    zap buffer 0 done
>>    +++++++init buffer type: 2 no: 1 length: 0
>>    zap buffer 2 done
>>    +++++++init buffer type: 4 no: 2 length: 0
>>    zap buffer 4 done
>>    timestretch end
>>    Zapping Instant Energy buffers
>>    applying plugin from sample: 0 to sample:0
>>    Plugin applied
>>    Trying to apply envelope
>>    in central wave zapWaveCanvasBuffers()
>>    in wavecanvas (parent [central wave]) Buffers zapped
>>    S: 0 E: 68000 PX: 0 Z: 68
>>    start: 0 end: 0
>>    freecycle: wavecanvas.cpp:204: void WaveCanvas::forceRepaint(long
>>    int, long int): Assertion `end_sample>start_sample' failed.
>>    Aborted
>>
>> A occhio sembra che quando vengono passati i parametri "start" e "end" del
>> sample a wavecanvas questi vengano per errore azzerati, da qui l'errore.
>> Te lo fa con qualsiasi selezione tu imposti o solo se hai selezionato
>> l'intero sample? Comunque mi sa che è un bug del programma.
>> Ciao
>> Ercole
>> --
>> Freedom is nothing else but a  chance to be better.
>> A.Camus
>>
> sto utilizzando un sample intero...  in loop
> bhe sul pc di file wave ne ho pochi (3)
> e con questi che ci giocherellavo....
> é troppo impegnativo?
> ciao e grazie
>
>
Non credo quello, sto pensando ad un bug del programma: prova a tolgiere
anche solo gli ultimi 2-3 secondi dal campione e vedere se lo da ancora;
scorrendo il log notavo che l'endpoint era sempre 68731, poi alla fine prima
dell'errore diventa 68000 esatti e poi 0

-- 
Freedom is nothing else but a chance to be better.
A.Camus
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://tao/pipermail/openmamba-devel-it/attachments/20080720/5e4900cc/attachment-0001.html>


Maggiori informazioni sulla lista openmamba-devel-it