[openmamba-devel-it] blacklist modulo nouveau
Tiziana
tiziana.ferro a gmail.com
Sab 31 Dic 2011 18:01:40 CET
Silvan, con la live della versione vecchia di Mamba (credo la penultima, è
openmamba-milestone2_livecd release 1.99.7 for i586 (milestone2-pre7)
[livecd build:ven 21 ott 2011 16:24:49 CEST]) e kernel 3.0mamba la scheda
parte anche se male (credo sia partita in vesa) e parte da sola senza
nouveau e senza caricare il driver nvidia.
con questa versione faccio sudo modprobe nvidia e ho lo stesso errore:
FATAL: COULD NOT READ
'/lib/modules/3.0mamba/kernel/drivers/video/nvidia_current.ko': No such
file or directory
infatti il file è *nvidia_current_ko* e non *nvidia_current.ko*
non posso modificare il file *nvidia_current_ko* sulla live per verificare
come si comporti nominandolo .ko, ma se il driver non è cambiato immagino
che mi risponda come la pre8, che la scheda non è NVIDIA, ma come vedrai
dal lspci allegato lo è:
02:00.0 VGA compatible controller: *nVidia Corporation G96 [GeForce
9400 GT]* (rev a1)
Titti*
*
-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://ml.openmamba.org/pipermail/openmamba-devel-it/attachments/20111231/9e9d463a/attachment-0001.html>
-------------- parte successiva --------------
lug and Play ACPI device, IDs PNP0a03 (active)
[ 1.181329] pnp 00:01: [dma 4]
[ 1.181329] pnp 00:01: [io 0x0000-0x000f]
[ 1.181329] pnp 00:01: [io 0x0081-0x0083]
[ 1.181329] pnp 00:01: [io 0x0087]
[ 1.181329] pnp 00:01: [io 0x0089-0x008b]
[ 1.181329] pnp 00:01: [io 0x008f]
[ 1.181329] pnp 00:01: [io 0x00c0-0x00df]
[ 1.181844] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.181851] pnp 00:02: [io 0x0061]
[ 1.181900] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.181900] pnp 00:03: [io 0x00f0-0x00ff]
[ 1.181900] pnp 00:03: [irq 13]
[ 1.181928] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.182345] pnp 00:04: [io 0x03f0-0x03f5]
[ 1.182349] pnp 00:04: [io 0x03f7]
[ 1.182357] pnp 00:04: [irq 6]
[ 1.182360] pnp 00:04: [dma 2]
[ 1.182459] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.183030] pnp 00:05: [io 0x0378-0x037f]
[ 1.183034] pnp 00:05: [io 0x0778-0x077b]
[ 1.183041] pnp 00:05: [irq 7]
[ 1.183044] pnp 00:05: [dma 3]
[ 1.183251] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 1.183831] pnp 00:06: [io 0x0010-0x001f]
[ 1.183831] pnp 00:06: [io 0x0022-0x003f]
[ 1.183831] pnp 00:06: [io 0x0044-0x005f]
[ 1.183831] pnp 00:06: [io 0x0062-0x0063]
[ 1.183831] pnp 00:06: [io 0x0065-0x006f]
[ 1.183831] pnp 00:06: [io 0x0072-0x007f]
[ 1.183831] pnp 00:06: [io 0x0080]
[ 1.183831] pnp 00:06: [io 0x0084-0x0086]
[ 1.183831] pnp 00:06: [io 0x0088]
[ 1.183831] pnp 00:06: [io 0x008c-0x008e]
[ 1.183831] pnp 00:06: [io 0x0090-0x009f]
[ 1.183831] pnp 00:06: [io 0x00a2-0x00bf]
[ 1.183831] pnp 00:06: [io 0x00e0-0x00ef]
[ 1.183831] pnp 00:06: [io 0x0295-0x0296]
[ 1.183831] pnp 00:06: [io 0x03e0-0x03e7]
[ 1.183831] pnp 00:06: [io 0x04d0-0x04d1]
[ 1.183831] pnp 00:06: [io 0x0800-0x087f]
[ 1.183831] pnp 00:06: [io 0x0400-0x041f]
[ 1.183831] pnp 00:06: [io 0x0000-0xffffffff disabled]
[ 1.183831] pnp 00:06: [mem 0xfecc0000-0xfecc0fff]
[ 1.183831] pnp 00:06: [mem 0x00000000-0xffffffff disabled]
[ 1.183946] system 00:06: [io 0x0295-0x0296] has been reserved
[ 1.183991] system 00:06: [io 0x03e0-0x03e7] has been reserved
[ 1.184125] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 1.184258] system 00:06: [io 0x0800-0x087f] has been reserved
[ 1.184391] system 00:06: [io 0x0400-0x041f] has been reserved
[ 1.184526] system 00:06: [mem 0xfecc0000-0xfecc0fff] could not be reserved
[ 1.184666] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.184858] pnp 00:07: [io 0x0070-0x0071]
[ 1.184866] pnp 00:07: [irq 8]
[ 1.184923] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.184923] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 1.184923] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 1.185002] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.185002] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.185138] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.185181] pnp 00:09: [io 0x0060]
[ 1.185185] pnp 00:09: [io 0x0064]
[ 1.185192] pnp 00:09: [irq 1]
[ 1.185255] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.185255] pnp 00:0a: [irq 12]
[ 1.185255] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 1.186059] pnp 00:0b: [io 0x03f8-0x03ff]
[ 1.186067] pnp 00:0b: [irq 4]
[ 1.186070] pnp 00:0b: [dma 0 disabled]
[ 1.186190] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.186190] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 1.186190] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.186190] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.186190] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 1.186194] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 1.186830] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 1.186830] pnp 00:0d: [mem 0x00100000-0x3fffffff]
[ 1.186830] pnp 00:0d: [mem 0xff780000-0xffffffff]
[ 1.186830] pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 1.186841] pnp 00:0d: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 1.187050] pnp 00:0d: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 1.187258] pnp 00:0d: disabling [mem 0x00100000-0x3fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 1.187550] system 00:0d: [mem 0xff780000-0xffffffff] has been reserved
[ 1.187860] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.188054] pnp: PnP ACPI: found 14 devices
[ 1.188176] ACPI: ACPI bus type pnp unregistered
[ 1.188303] PnPBIOS: Disabled by ACPI PNP
[ 1.227922] Switching to clocksource acpi_pm
[ 1.228088] PCI: max bus depth: 1 pci_try_num: 2
[ 1.228118] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.228247] pci 0000:00:01.0: bridge window [io disabled]
[ 1.228382] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.228515] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.228654] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 1.228529] Switched to NOHz mode on CPU #0
[ 1.228682] Switched to NOHz mode on CPU #1
[ 1.228809] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 1.228947] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xfebfffff]
[ 1.229094] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff pref]
[ 1.229280] pci 0000:00:13.1: PCI bridge to [bus 03-03]
[ 1.229410] pci 0000:00:13.1: bridge window [io 0xe000-0xefff]
[ 1.229548] pci 0000:00:13.1: bridge window [mem disabled]
[ 1.229681] pci 0000:00:13.1: bridge window [mem pref disabled]
[ 1.229832] pci 0000:00:01.0: setting latency timer to 64
[ 1.229851] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 1.229991] pci 0000:00:02.0: setting latency timer to 64
[ 1.230011] pci 0000:00:13.1: setting latency timer to 64
[ 1.230016] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.230020] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.230024] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.230028] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.230032] pci_bus 0000:00: resource 8 [mem 0x40000000-0xdfffffff]
[ 1.230035] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xff77ffff]
[ 1.230039] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.230043] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xfebfffff]
[ 1.230047] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 1.230051] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.230054] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 1.230058] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 1.230062] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.230065] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.230069] pci_bus 0000:03: resource 8 [mem 0x40000000-0xdfffffff]
[ 1.230073] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xff77ffff]
[ 1.230141] NET: Registered protocol family 2
[ 1.230378] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.230858] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.231606] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.232151] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.232288] TCP reno registered
[ 1.232407] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.232553] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.232945] NET: Registered protocol family 1
[ 1.233282] RPC: Registered named UNIX socket transport module.
[ 1.233416] RPC: Registered udp transport module.
[ 1.233541] RPC: Registered tcp transport module.
[ 1.233666] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.233838] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 1.233975] PCI: CLS mismatch (32 != 64), using 64 bytes
[ 1.234113] pci 0000:02:00.0: Boot video device
[ 1.234191] Trying to unpack rootfs image as initramfs...
[ 1.967620] Freeing initrd memory: 19932k freed
[ 1.982840] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 1.982981] apm: disabled - APM is not SMP safe.
[ 1.983192] scx200: NatSemi SCx200 Driver
[ 1.983763] audit: initializing netlink socket (disabled)
[ 1.983905] type=2000 audit(1325352805.982:1): initialized
[ 1.986840] highmem bounce pool size: 64 pages
[ 1.986971] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.997237] VFS: Disk quotas dquot_6.5.2
[ 1.997543] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.998499] Installing knfsd (copyright (C) 1996 okir a monad.swb.de).
[ 1.998960] msgmni has been set to 1737
[ 1.999722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.999906] io scheduler noop registered (default)
[ 2.000434] pcieport 0000:00:02.0: setting latency timer to 64
[ 2.000499] pcieport 0000:00:02.0: irq 64 for MSI/MSI-X
[ 2.000868] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 2.000930] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 2.001152] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.001292] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 2.001815] intel_idle: MWAIT substates: 0x220
[ 2.001818] intel_idle: does not run on family 6 model 15
[ 2.001826] ERST: Table is not found!
[ 2.001957] isapnp: Scanning for PnP cards...
[ 2.359164] isapnp: No Plug & Play device found
[ 2.409313] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.430081] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.486064] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.496489] Non-volatile memory driver v1.3
[ 2.497057] Floppy drive(s): fd0 is 1.44M
[ 2.512904] FDC 0 is a post-1991 82077
[ 2.518507] brd: module loaded
[ 2.520267] loop: module loaded
[ 2.520460] MM: desc_per_page = 128
[ 2.521387] usbcore: registered new interface driver libusual
[ 2.521683] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.522392] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.522525] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.522926] mousedev: PS/2 mouse device common for all mice
[ 2.523315] EISA: Probing bus 0 at eisa.0
[ 2.523437] EISA: Cannot allocate resource for mainboard
[ 2.523567] Cannot allocate resource for EISA slot 1
[ 2.523693] Cannot allocate resource for EISA slot 2
[ 2.523820] Cannot allocate resource for EISA slot 3
[ 2.523947] Cannot allocate resource for EISA slot 4
[ 2.524100] Cannot allocate resource for EISA slot 5
[ 2.524227] Cannot allocate resource for EISA slot 6
[ 2.524354] Cannot allocate resource for EISA slot 7
[ 2.524538] Cannot allocate resource for EISA slot 8
[ 2.524665] EISA: Detected 0 cards.
[ 2.524784] cpuidle: using governor ladder
[ 2.524906] cpuidle: using governor menu
[ 2.525623] Initializing XFRM netlink socket
[ 2.525757] NET: Registered protocol family 17
[ 2.525889] NET: Registered protocol family 15
[ 2.526108] Registering the dns_resolver key type
[ 2.526257] Using IPI No-Shortcut mode
[ 2.529447] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.529778] Freeing unused kernel memory: 528k freed
[ 2.530221] Write protecting the kernel text: 3444k
[ 2.530387] Write protecting the kernel read-only data: 1180k
[ 2.566320] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.633187] dracut: root was live:/dev/disk/by-label/openmamba-milestone2_livecd, liveroot is now live:LABEL=openmamba-milestone2_livecd
[ 2.661923] udevd[1212]: starting version 173
[ 2.720277] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 2.721287] ACPI: Sleep Button [SLPB]
[ 2.723800] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.724772] ACPI: Power Button [PWRB]
[ 2.727296] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.728196] ACPI: Power Button [PWRF]
[ 2.733078] wmi: Mapper loaded
[ 2.735195] Linux agpgart interface v0.103
[ 2.739303] [drm] Initialized drm 1.1.0 20060810
[ 2.963383] dracut: Starting plymouth daemon
[ 2.984031] Refined TSC clocksource calibration: 1595.999 MHz.
[ 2.984171] Switching to clocksource tsc
[ 3.092120] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.092347] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.092500] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.098721] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 3.098961] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480
[ 3.099171] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.099311] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.099494] usb usb1: Product: UHCI Host Controller
[ 3.099621] usb usb1: Manufacturer: Linux 3.0mamba uhci_hcd
[ 3.099752] usb usb1: SerialNumber: 0000:00:10.0
[ 3.119097] hub 1-0:1.0: USB hub found
[ 3.119235] hub 1-0:1.0: 2 ports detected
[ 3.120325] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.120699] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.121858] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 3.124571] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.124768] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.125580] libata version 3.00 loaded.
[ 3.126241] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 3.126481] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800
[ 3.127564] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.127708] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.127890] usb usb2: Product: UHCI Host Controller
[ 3.128031] usb usb2: Manufacturer: Linux 3.0mamba uhci_hcd
[ 3.128163] usb usb2: SerialNumber: 0000:00:10.1
[ 3.130632] hub 2-0:1.0: USB hub found
[ 3.130766] hub 2-0:1.0: 2 ports detected
[ 3.131191] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.131355] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.131725] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3
[ 3.131944] ehci_hcd 0000:00:10.4: debug port 1
[ 3.132186] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf5fffc00
[ 3.138021] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 3.139100] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.139241] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.158470] usb usb3: Product: EHCI Host Controller
[ 3.158607] usb usb3: Manufacturer: Linux 3.0mamba ehci_hcd
[ 3.158740] usb usb3: SerialNumber: 0000:00:10.4
[ 3.165312] hub 3-0:1.0: USB hub found
[ 3.165448] hub 3-0:1.0: 8 ports detected
[ 3.167255] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.168921] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1b000, 00:19:66:e1:36:0f, IRQ 23
[ 3.169891] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1
[ 3.170378] sata_via 0000:00:0f.0: version 2.6
[ 3.170398] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.170580] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 3.183821] scsi0 : sata_via
[ 3.185449] scsi1 : sata_via
[ 3.191964] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
[ 3.201487] ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
[ 3.201787] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.201942] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.202890] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 3.203154] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
[ 3.203345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.203486] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.203669] usb usb4: Product: UHCI Host Controller
[ 3.203799] usb usb4: Manufacturer: Linux 3.0mamba uhci_hcd
[ 3.203931] usb usb4: SerialNumber: 0000:00:10.2
[ 3.205212] hub 4-0:1.0: USB hub found
[ 3.205345] hub 4-0:1.0: 2 ports detected
[ 3.205782] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.205934] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.206302] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 3.206537] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
[ 3.206717] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.206858] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.207087] usb usb5: Product: UHCI Host Controller
[ 3.207271] usb usb5: Manufacturer: Linux 3.0mamba uhci_hcd
[ 3.207406] usb usb5: SerialNumber: 0000:00:10.3
[ 3.207989] hub 5-0:1.0: USB hub found
[ 3.208142] hub 5-0:1.0: 2 ports detected
[ 3.228128] pata_via 0000:00:0f.1: version 0.3.4
[ 3.251227] scsi2 : pata_via
[ 3.256106] scsi3 : pata_via
[ 3.258336] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 3.258480] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.403017] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 3.557422] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[ 3.557556] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.563413] ata1.00: configured for UDMA/133
[ 3.563688] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
[ 3.564214] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.564509] sd 0:0:0:0: [sda] Write Protect is off
[ 3.564641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.564691] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.625620] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 3.626954] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.671022] usb 3-5: new high speed USB device number 4 using ehci_hcd
[ 3.765014] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.791942] usb 3-5: New USB device found, idVendor=05e3, idProduct=070e
[ 3.792087] usb 3-5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.792227] usb 3-5: Product: USB Storage
[ 3.792350] usb 3-5: SerialNumber: 000000009602
[ 3.796409] Initializing USB Mass Storage driver...
[ 3.796678] scsi4 : usb-storage 3-5:1.0
[ 3.797116] usbcore: registered new interface driver usb-storage
[ 3.797254] USB Mass Storage support registered.
[ 3.798233] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.798737] usbcore: registered new interface driver uas
[ 3.800351] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.802458] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.803099] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.805084] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 3.805720] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0
[ 3.807584] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 3.808828] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 3.895018] usb 3-7: new high speed USB device number 5 using ehci_hcd
[ 3.941443] ata4.01: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
[ 3.947308] ata4.01: configured for UDMA/66
[ 3.949653] scsi 3:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
[ 3.971554] sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.971744] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.972576] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 4.010483] usb 3-7: New USB device found, idVendor=0930, idProduct=6545
[ 4.010626] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.010767] usb 3-7: Product: DataTraveler 2.0
[ 4.010891] usb 3-7: Manufacturer: Kingston
[ 4.011021] usb 3-7: SerialNumber: 001D92A85EAAB8B080060595
[ 4.011734] scsi5 : usb-storage 3-7:1.0
[ 4.013048] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 4.014381] sd 5:0:0:0: [sdf] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB)
[ 4.015417] sd 5:0:0:0: [sdf] Write Protect is off
[ 4.015550] sd 5:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 4.017161] sd 5:0:0:0: [sdf] No Caching mode page present
[ 4.017300] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 4.020489] sd 5:0:0:0: [sdf] No Caching mode page present
[ 4.020624] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 4.022131] sdf: sdf1
[ 4.024991] sd 5:0:0:0: [sdf] No Caching mode page present
[ 4.025135] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 4.025272] sd 5:0:0:0: [sdf] Attached SCSI removable disk
[ 4.218018] usb 1-1: new full speed USB device number 2 using uhci_hcd
[ 4.392204] usb 1-1: New USB device found, idVendor=03f0, idProduct=0c17
[ 4.392347] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.392487] usb 1-1: Product: hp LaserJet 1010
[ 4.392612] usb 1-1: Manufacturer: Hewlett-Packard
[ 4.392739] usb 1-1: SerialNumber: 00CNFF204052
[ 4.601023] usb 2-1: new full speed USB device number 2 using uhci_hcd
[ 4.817606] usb 2-1: New USB device found, idVendor=041e, idProduct=4028
[ 4.817747] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.817888] usb 2-1: Product: Creative WebCam Vista Plus.
[ 4.818026] usb 2-1: Manufacturer: Creative
[ 10.745036] ISO 9660 Extensions: RRIP_1991A
[ 10.771531] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 12.000058] Registering unionfs 2.5.9.2 (for 2.6.39.2)
[ 12.088183] dracut: Mounted root filesystem unionfs
[ 13.063640] dracut: Switching root
[ 20.765580] udevd[3126]: starting version 173
[ 24.424728] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17
[ 24.425271] usbcore: registered new interface driver usblp
[ 24.848761] agpgart: Detected VIA PT880 Ultra chipset
[ 24.852245] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 25.084816] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.085095] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 25.085306] sd 4:0:0:1: Attached scsi generic sg2 type 0
[ 25.085513] sd 4:0:0:2: Attached scsi generic sg3 type 0
[ 25.085720] sd 4:0:0:3: Attached scsi generic sg4 type 0
[ 25.085923] sr 3:0:1:0: Attached scsi generic sg5 type 5
[ 25.086151] sd 5:0:0:0: Attached scsi generic sg6 type 0
[ 25.618381] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 25.837145] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 26.501618] Linux media interface: v0.10
[ 26.508746] Error: Driver 'pcspkr' is already registered, aborting...
[ 26.616983] rtc_cmos 00:07: RTC can wake from S4
[ 26.617888] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 26.618082] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 26.810696] ACPI: acpi_idle registered with cpuidle
[ 27.394940] Linux video capture interface: v2.00
[ 27.956591] psmouse serio1: ID: 7f 03 c8
[ 28.078537] logips2pp: Detected unknown logitech mouse model 127
[ 28.164949] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.499586] snd_ens1370 0000:03:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 28.636935] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 29.038144] gspca: v2.13.0 registered
[ 29.049412] parport_pc 00:05: reported by Plug and Play ACPI
[ 29.049663] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 29.112260] input: pac207 as /devices/pci0000:00/0000:00:10.1/usb2/2-1/input/input6
[ 29.112898] usbcore: registered new interface driver pac207
[ 29.643628] lp0: using parport0 (interrupt-driven).
[ 29.669853] ppdev: user-space parallel port driver
[ 33.125897] nvidia: module license 'NVIDIA' taints kernel.
[ 33.126041] Disabling lock debugging due to kernel taint
[ 33.696923] NET: Registered protocol family 10
[ 34.443253] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 34.443398] NVRM: Can't find an IRQ for your NVIDIA card!
[ 34.449294] NVRM: Please check your BIOS settings.
[ 34.449419] NVRM: [Plug & Play OS] should be set to NO
[ 34.449547] NVRM: [Assign IRQ to VGA] should be set to YES
[ 34.449683] nvidia: probe of 0000:02:00.0 failed with error -1
[ 34.449843] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 34.450207] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 36.293917] NET: Registered protocol family 3
[ 36.370159] NET: Registered protocol family 6
[ 36.425479] NET: Registered protocol family 11
[ 36.552705] NET: Registered protocol family 4
[ 36.564778] NET: Registered protocol family 5
[ 36.575580] NET: Registered protocol family 9
[ 36.575730] X.25 for Linux Version 0.2
[ 39.503777] unionfs: remount ignoring option "dirs"
[ 39.503911] unionfs: (null): new generation number 2
[ 39.711566] unionfs: remount ignoring option "dirs"
[ 39.711699] unionfs: (null): new generation number 3
[ 42.756149] EXT4-fs (sda2): recovery complete
[ 42.756531] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 43.065184] EXT4-fs (sda3): recovery complete
[ 43.066928] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 43.202706] EXT4-fs (sda5): recovery complete
[ 43.202838] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 43.326801] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
[ 43.329377] EXT4-fs (sda6): recovery complete
[ 43.329504] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 43.520414] EXT4-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
[ 43.531995] EXT4-fs (sda7): recovery complete
[ 43.532129] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 43.730107] EXT4-fs (sda8): warning: maximal mount count reached, running e2fsck is recommended
[ 43.739391] EXT4-fs (sda8): recovery complete
[ 43.739521] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 49.506610] NVRM: Can't find an IRQ for your NVIDIA card!
[ 49.506746] NVRM: Please check your BIOS settings.
[ 49.506872] NVRM: [Plug & Play OS] should be set to NO
[ 49.507005] NVRM: [Assign IRQ to VGA] should be set to YES
[ 49.507142] nvidia: probe of 0000:02:00.0 failed with error -1
[ 49.507304] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 49.507445] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 57.623770] NVRM: Can't find an IRQ for your NVIDIA card!
[ 57.623906] NVRM: Please check your BIOS settings.
[ 57.624038] NVRM: [Plug & Play OS] should be set to NO
[ 57.624165] NVRM: [Assign IRQ to VGA] should be set to YES
[ 57.624301] nvidia: probe of 0000:02:00.0 failed with error -1
[ 57.624462] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 57.624602] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 58.815170] mtrr: base(0xf7000000) is not aligned on a size(0xe00000) boundary
[ 62.106131] mtrr: no MTRR for f7000000,e00000 found
[ 83.788363] snd_ens1370 0000:03:05.0: PCI INT A disabled
[ 83.793107] snd_ens1370 0000:03:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 85.197258] Adding 3903756k swap on /dev/sda1. Priority:1 extents:1 across:3903756k
[ 121.149822] fuse init (API version 7.16)
[ 121.314022] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 127.414868] uhci_hcd 0000:00:10.2: PCI INT C disabled
[ 127.414912] uhci_hcd 0000:00:10.2: PME# enabled
[ 127.425416] uhci_hcd 0000:00:10.3: PCI INT D disabled
[ 127.425455] uhci_hcd 0000:00:10.3: PME# enabled
[ 127.927022] uhci_hcd 0000:00:10.2: BAR 4: set to [io 0xb880-0xb89f] (PCI address [0xb880-0xb89f])
[ 127.927084] uhci_hcd 0000:00:10.2: PME# disabled
[ 127.927098] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 127.973019] uhci_hcd 0000:00:10.3: BAR 4: set to [io 0xbc00-0xbc1f] (PCI address [0xbc00-0xbc1f])
[ 127.973090] uhci_hcd 0000:00:10.3: PME# disabled
[ 127.973103] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 130.311327] NVRM: Can't find an IRQ for your NVIDIA card!
[ 130.311332] NVRM: Please check your BIOS settings.
[ 130.311334] NVRM: [Plug & Play OS] should be set to NO
[ 130.311337] NVRM: [Assign IRQ to VGA] should be set to YES
[ 130.311345] nvidia: probe of 0000:02:00.0 failed with error -1
[ 130.311381] NVRM: The NVIDIA probe routine failed for 1 device(s).
[ 130.311384] NVRM: None of the NVIDIA graphics adapters were initialized!
[ 131.398707] mtrr: base(0xf7000000) is not aligned on a size(0xe00000) boundary
[ 131.890010] eth0: no IPv6 routers present
[ 164.774468] ata1.00: configured for UDMA/133
[ 164.774476] ata1: EH complete
[ 165.141170] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 165.190415] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 165.251773] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 165.299748] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 165.362752] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 165.686317] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 220.903018] usb 3-6: new high speed USB device number 6 using ehci_hcd
[ 221.020934] usb 3-6: New USB device found, idVendor=0930, idProduct=6545
[ 221.020939] usb 3-6: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 221.020943] usb 3-6: Product: USB Flash Memory
[ 221.020946] usb 3-6: SerialNumber: 0D313970A1E11928
[ 221.021566] scsi6 : usb-storage 3-6:1.0
[ 221.023713] scsi 6:0:0:0: Direct-Access USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS
[ 221.023951] sd 6:0:0:0: Attached scsi generic sg7 type 0
[ 222.794370] sd 6:0:0:0: [sdg] 4028416 512-byte logical blocks: (2.06 GB/1.92 GiB)
[ 222.794863] sd 6:0:0:0: [sdg] Write Protect is off
[ 222.794867] sd 6:0:0:0: [sdg] Mode Sense: 23 00 00 00
[ 222.795362] sd 6:0:0:0: [sdg] No Caching mode page present
[ 222.795365] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[ 222.797750] sd 6:0:0:0: [sdg] No Caching mode page present
[ 222.797755] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[ 222.798508] sdg: sdg1
[ 222.801612] sd 6:0:0:0: [sdg] No Caching mode page present
[ 222.801617] sd 6:0:0:0: [sdg] Assuming drive cache: write through
[ 222.801621] sd 6:0:0:0: [sdg] Attached SCSI removable disk
-------------- parte successiva --------------
Module Size Used by
nls_iso8859_1 2965 1
nls_cp437 4493 1
freq_table 1683 0
mperf 879 0
container 1837 0
sparse_keymap 1964 0
rfkill 10426 0
thermal 6418 0
fan 1782 0
battery 8599 0
ac 2397 0
fuse 49720 1
snd_ens1370 14489 4
ext4 210942 6
jbd2 39839 1 ext4
crc16 993 1 ext4
x25 25934 0
appletalk 18549 0
ipx 14273 0
p8023 688 1 ipx
rose 28555 0
netrom 25191 0
ax25 36235 2 rose,netrom
ipv6 210401 22
ppdev 4138 0
lp 5688 0
gspca_pac207 4172 0
parport_pc 25778 1
gspca_main 13844 1 gspca_pac207
shpchp 19363 0
psmouse 50323 0
videodev 59147 1 gspca_main
gameport 5532 1 snd_ens1370
processor 21265 0
parport 21267 3 ppdev,lp,parport_pc
rtc_cmos 6818 0
media 6953 1 videodev
snd_rawmidi 12538 1 snd_ens1370
i2c_viapro 4115 0
snd_seq_device 4017 1 snd_rawmidi
pcspkr 1255 0
serio_raw 2906 0
snd_pcm 49781 2 snd_ens1370
pci_hotplug 18519 1 shpchp
snd_timer 12579 2 snd_pcm
snd 36064 11 snd_ens1370,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer
sg 19936 0
soundcore 3801 1 snd
via_agp 4599 1
snd_page_alloc 4997 2 snd_ens1370,snd_pcm
usblp 8024 0
unionfs 58944 1
squashfs 21650 1
isofs 25485 1
sr_mod 11334 1
cdrom 26292 1 sr_mod
pata_acpi 2036 0
ata_generic 2247 0
uas 5594 0
usb_storage 25228 1
pata_via 5899 1
sata_via 5520 7
via_rhine 17115 0
ehci_hcd 28179 0
libata 129357 4 pata_acpi,ata_generic,pata_via,sata_via
uhci_hcd 16232 0
ttm 38480 0
drm_kms_helper 18481 0
drm 125128 2 ttm,drm_kms_helper
agpgart 18327 3 via_agp,ttm,drm
i2c_algo_bit 3736 0
mxm_wmi 1029 0
wmi 6283 1 mxm_wmi
video 9603 0
thermal_sys 9945 4 thermal,fan,processor,video
hwmon 1025 1 thermal_sys
button 3451 0
-------------- parte successiva --------------
00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller
00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller
00:0f.0 IDE interface: VIA Technologies, Inc. VT8237/8251 Serial ATA Controller
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
00:10.3 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev b0)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237S PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1)
03:05.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
Maggiori informazioni sulla lista
openmamba-devel-it