[openmamba-devel-it] sensori termici

[gil]

ciao
sto provando con la configurazione di conky
secondo una guida (ubuntu) dovrebbe restuirmi qualcosa tipo

k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
             +23°C
Core1 Temp:
             +19°C

it8716-isa-0290
Adapter: ISA adapter
VCore:     +1.18 V  (min =  +0.00 V, max =  +4.08 V)   
VDDR:      +3.25 V  (min =  +0.00 V, max =  +4.08 V)   
+3.3V:     +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
+5V:       +4.81 V  (min =  +0.00 V, max =  +6.85 V)   
+12V:     +11.58 V  (min =  +0.00 V, max = +16.32 V)   
in5:       +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in6:       +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
5VSB:      +4.84 V  (min =  +0.00 V, max =  +6.85 V)   
VBat:      +2.94 V
fan1:        0 RPM  (min =    0 RPM)                   
fan2:        0 RPM  (min =    0 RPM)                   
fan3:        0 RPM  (min =    0 RPM)                   
temp1:       +30°C  (low  =    -1°C, high =  +127°C)   *sensor* = diode   
temp2:       +30°C  (low  =    -1°C, high =  +127°C)   *sensor* = thermistor   
temp3:        -7°C  (low  =    -1°C, high =  +127°C)   *sensor* = thermistor   
vid:      +1.300 V


invece di

$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
             +34°C
Core1 Temp:
             +43°C

mi mancano dei dirvers o sto sbagliando qualcosa?
grazie