[openmamba-devel-it] Sondaggio: importare in devel il kernel 2.6.26.8?
gil
puntogil a libero.it
Mer 3 Dic 2008 23:13:54 CET
Silvan Calarco ha scritto:
> Il mercoledì 03 dicembre 2008 19:52:28 gil ha scritto:
>
>> cat /proc/asound/card0/codec#0 |head -n1
>> Codec: Realtek ALC888
>>
>
> Ho trovato questo, prova con questa opzione in /etc/modprobe.conf:
>
> options snd-hda-intel model=3stack-6ch
>
> Oppure una di queste:
>
> ALC883/888
> 3stack-dig 3-jack with SPDIF I/O
> 6stack-dig 6-jack digital with SPDIF I/O
> 3stack-6ch 3-jack 6-channel
> 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
> 6stack-dig-demo 6-jack digital for Intel demo board
> acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
> medion Medion Laptops
> targa-dig Targa/MSI
> targa-2ch-dig Targs/MSI with 2-channel
> laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
> auto auto-config reading BIOS (default)
>
> Assicurati sempre di avere i volumi del mixer al massimo e verifica se il
> problema è che si sente piano oppure che proprio non si sente nulla.
>
>
>>> P.S. Estratto da lspci:
>>>
>> come si intepreta in questi casi?
>>
>
> In questo caso mi interessa solo la prima e l'ultima riga, ossia
> l'identificativo del dispositivo e il driver del kernel in uso.
>
> ciao
> Silvan
>
>
ciao
ho provato con le opzioni che mi hai passato ancora grazie
quella migliore é auto
pero dopo un po la qualita dell'audio si deteriora ... ritorna a gracchiare
adesso riesco ad utilizzare il dispositivo DVB
solo con kdetv (kaffeine non funziona... se ci provo va in crash)
03:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135
Video Broadcast Decoder (rev d1)
Subsystem: ASUSTeK Computer Inc. Unknown device 4871
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fddfe000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Kernel driver in use: saa7134
Kernel modules: saa7134
pero non ho l'audio ..anche qui
ho trovato una guida
(http://www.linuxtv.org/v4lwiki/index.php/Saa7134-alsa) per impostare
alsa ma
non ci ho preso oppure dipende dal problema a monte..(?)
$ sudo modprobe saa7134-alsa index=1,2,3,4
# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC883 Analog [ALC883 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SAA7134 [SAA7134], device 0: SAA7134 PCM [SAA7134 PCM]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ kdetv
kio (KTrader): query for kdetv Video Source : returning 3 offers
kio (KTrader): query for kdetv Channel Format : returning 5 offers
kio (KTrader): query for kdetv Audio Mixer : returning 2 offers
kio (KTrader): query for kdetv OSD : returning 2 offers
kio (KTrader): query for kdetv Misc : returning 3 offers
kio (KTrader): query for kdetv VBI Decoder : returning 1 offers
kio (KTrader): query for kdetv Image Filter : returning 7 offers
kio (KTrader): query for kdetv Postprocess Filter : returning 5 offers
Creating vbi proxy client, rev.
$Id: proxy-client.c,v 1.18 2008/02/19 00:35:21 mschimek Exp $
proxy_msg: connect: error 2, No such file or directory
kdetv: WARNING: VBIDecoder: vbi_capture_proxy_new error: Connessione via
socket fallita, server non attivo.
Try to open V4L2 0.20 VBI device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.37 2008/02/19 00:35:20 mschimek Exp $
Opened /dev/vbi
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Try to open V4L2 2.6 VBI device,
libzvbi interface rev.
$Id: io-v4l2k.c,v 1.49 2008/02/19 00:35:20 mschimek Exp $.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Opened /dev/vbi.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: /dev/vbi (ASUS P7131 4871) is a
v4l2 vbi device,
driver saa7134, version 0x0000020e.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Using streaming interface.
libzvbi:io-v4l2k:v4l2_get_videostd: Current scanning system is 625.
libzvbi:io-v4l2k:v4l2_update_services: Querying current vbi parameters...
libzvbi:io-v4l2k:v4l2_update_services: ...success.
libzvbi:print_vfmt: VBI capture parameters supported:
libzvbi:print_vfmt: VBI capture parameters granted:
libzvbi:print_vfmt: Fixes applied:
libzvbi:raw_decoder:vbi3_raw_decoder_add_services: No services to add.
libzvbi:io-v4l2k:v4l2_update_services: Nyquist check passed.
libzvbi:io-v4l2k:v4l2_update_services: Request decoding of services
0x60000c7f, strict level -1.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service
0x00000020 (Closed Caption 525, field 1) requires videostd_set 0x2, have
0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service
0x00000040 (Closed Caption 525, field 2) requires videostd_set 0x2, have
0x0.
libzvbi:io-v4l2k:v4l2_update_services: Will capture services 0x0000041f,
added 0x41f commit=1.
libzvbi:io-v4l2k:v4l2_stream_alloc: Requesting 16 streaming i/o buffers.
libzvbi:io-v4l2k:v4l2_stream_alloc: Mapping 16 streaming i/o buffers.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Successfully opened /dev/vbi
(ASUS P7131 4871).
kdetv: could not connect to socket
kdetv: No such file or directory
kdetv: WARNING: lirc: Failed to initialize
kdetv: WARNING: V4L2Dev::enqueueBuffer(): buffer already queued: 0
V4L2Grabber::~V4L2Grabber(): wait().
V4L2Grabber::~V4L2Grabber(): deleted.
arecord -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay -
kio (KTrader): query for kdetv Video Source : returning 3 offers
kio (KTrader): query for kdetv Channel Format : returning 5 offers
kio (KTrader): query for kdetv Audio Mixer : returning 2 offers
kio (KTrader): query for kdetv OSD : returning 2 offers
kio (KTrader): query for kdetv Misc : returning 3 offers
kio (KTrader): query for kdetv VBI Decoder : returning 1 offers
kio (KTrader): query for kdetv Image Filter : returning 7 offers
kio (KTrader): query for kdetv Postprocess Filter : returning 5 offers
Creating vbi proxy client, rev.
$Id: proxy-client.c,v 1.18 2008/02/19 00:35:21 mschimek Exp $
proxy_msg: connect: error 2, No such file or directory
kdetv: WARNING: VBIDecoder: vbi_capture_proxy_new error: Connessione via
socket fallita, server non attivo.
Try to open V4L2 0.20 VBI device, libzvbi interface rev.
$Id: io-v4l2.c,v 1.37 2008/02/19 00:35:20 mschimek Exp $
Opened /dev/vbi
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Try to open V4L2 2.6 VBI device,
libzvbi interface rev.
$Id: io-v4l2k.c,v 1.49 2008/02/19 00:35:20 mschimek Exp $.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Opened /dev/vbi.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: /dev/vbi (ASUS P7131 4871) is a
v4l2 vbi device,
driver saa7134, version 0x0000020e.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Using streaming interface.
libzvbi:io-v4l2k:v4l2_get_videostd: Current scanning system is 625.
libzvbi:io-v4l2k:v4l2_update_services: Querying current vbi parameters...
libzvbi:io-v4l2k:v4l2_update_services: ...success.
libzvbi:print_vfmt: VBI capture parameters supported:
libzvbi:print_vfmt: VBI capture parameters granted:
libzvbi:print_vfmt: Fixes applied:
libzvbi:raw_decoder:vbi3_raw_decoder_add_services: No services to add.
libzvbi:io-v4l2k:v4l2_update_services: Nyquist check passed.
libzvbi:io-v4l2k:v4l2_update_services: Request decoding of services
0x60000c7f, strict level -1.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service
0x00000020 (Closed Caption 525, field 1) requires videostd_set 0x2, have
0x0.
libzvbi:sampling_par:_vbi_sampling_par_permit_service: Service
0x00000040 (Closed Caption 525, field 2) requires videostd_set 0x2, have
0x0.
libzvbi:io-v4l2k:v4l2_update_services: Will capture services 0x0000041f,
added 0x41f commit=1.
libzvbi:io-v4l2k:v4l2_stream_alloc: Requesting 16 streaming i/o buffers.
libzvbi:io-v4l2k:v4l2_stream_alloc: Mapping 16 streaming i/o buffers.
libzvbi:io-v4l2k:vbi_capture_v4l2k_new: Successfully opened /dev/vbi
(ASUS P7131 4871).
kdetv: could not connect to socket
kdetv: No such file or directory
kdetv: WARNING: lirc: Failed to initialize
-------------- parte successiva --------------
Un allegato non testuale è stato rimosso....
Nome: puntogil.vcf
Tipo: text/x-vcard
Dimensione: 49 bytes
Descrizione: non disponibile
URL: <http://tao/pipermail/openmamba-devel-it/attachments/20081203/8c235066/attachment.vcf>
Maggiori informazioni sulla lista
openmamba-devel-it